P2 LED module-banner
P2 LED Module-Detailed guidance

LEGIDATECH LED screen factory produces indoor small pitch modules

that meet professional requirements and support COB,HOB processing with detailed instructions and guidance.

  • P2 LED MODULE
  • P2 LED MODULE (2)
  • indoor p2 led module
  • P2 LED Modules
  • P2 LED module for indoor
  • P2 LED MODULE
  • P2 LED MODULE (2)
  • indoor p2 led module
  • P2 LED Modules
  • P2 LED module for indoor

P2 LED Module-Detailed guidance

P2 LED Screen Module 320mmx160mm- P2 LED Module is mainly used for indoor high-end scenes such as control rooms, conference rooms, shopping malls, etc. due to the small pixel pitch.

  • Pixel Pitch: 2mm
  • Module Size: 320*160mm
  • Module Resolution: 160*80
  • Lamp brand: Nationstar
  • Refresh rate: 3840hz
  • 2 Years Warranty
Value
Pixel Pitch 2mm
Module Size(mm) 320*160
Module Pixel 16*8
Brightness 4500
Pixel Configuration SMD3535
Colors 281trillion
Refresh Rate (HZ) ≥3840
Pixel Matrix Per Sq.m 250,000
ngle (H/V) 140/140
Power Comsuption(max/avg) 400/150
IP Rate IP45/65
Input Voltage (AC) 110/240
Operating Temp. -20-60 Celsius degree
Operating Humidity 10-95% RH
Control Distance Ethernet cable 100m, optical fiber 5km
Support VGA Mode 800×600,1024×768,1280×1024,1600×1200
P2 LED module for indoor (3)
P2 LED module for indoor (5)

P2 LED module mask kit

The mask kit for the P2 LED module protects the LED beads by preventing external impurities such as dust, moisture, etc. from entering the interior of the module. This protects the LED beads and other internal components from damage.

The mask kit is also made of fiber-reinforced PC material with high light transmittance, which not only ensures the clarity of the visual effect, but also enhances the contrast and vividness of the display, and the outdoor module also adopts the oil-spraying process to truly restore the color of the screen.

The mask kit also disperses heat from the surface of the module and improves heat dissipation efficiency, ensuring stable operation of the LED display.

P2 LED Module Reinforcement ribs

Ordinary modules have only 2 or 3 reinforcements. The consequence of this is that the module tends to recess inwards, resulting in uneven modules, uneven displays and color differences.

LEGIDATECH’s P2 LED modules are designed with 5 reinforcement bars to make the module screen flatter, more integrated, stronger and more durable.

The P2 LED module reinforcements increase the flatness of the module and reduce unevenness caused by seams. Modules with 5 reinforcements stabilize the module well.

P2 LED module for indoor (4)
P2 LED module for indoor (6)

Strong Magnet of P2 LED Module

The P2 LED module uses powerful magnets that are permanently magnetic.

Strong magnetic adsorption, solid and reliable, can ensure that the LED display screen can be firmly fixed in any environment.

Strong magnetic mounted LED display module, even if there is no maintenance space need not worry, magnetic front maintenance, simple and convenient to realize the screen replacement and installation.

Driving IC of P2 LED module

The P2 LED display module universal driver IC determines the refresh frequency of the LED display. Generally, the refresh frequency reaches 1920HZ. The price of the LED display universal driver IC is the cheapest and is the most selected by other suppliers.

However, this will affect the display screen and often cause “caterpillars”. ”, display problems such as stroboscopic lines and uneven brightness caused by insufficient refresh.

LEGIDATECH uses a higher-priced PWM IC, which is often used in indoor rental LED displays, outdoor stage LED displays, and church LED displays.

the PWM IC can make the refresh rate of the LED display reach 3840HZ, it can satisfy the audience’s shooting of the color displayed on the screen.

P2 LED module for indoor (7)
P2 LED SCREEN MODULE

P2 LED module PCB circuit board

The PCB circuit board adopts the wave soldering process and has a green oil oxygen barrier layer to prevent the circuit from moisture and oxidation and improve the service life.

When the display is spliced and installed, the thickness difference between the PCB and the back body will affect the flatness of the product.

In order to save material costs, other suppliers choose PCBs with a thickness of 0.8 mm or 1.0 mm, but we uniformly choose a thickness of 1.6 mm, so that the PCB board will be more stable and durable. At the same time, the components save 30-40% energy than ordinary components.

P2 LED Module Power Supply

Our P2 LED module power supply is 200V, one power supply can carry 6 modules and one 2.5 square 220V cable can carry 20 power supplies. This ensures that each module can withstand enough current and voltage to achieve higher brightness and more stable display.

Moreover, the power supply design of our LED modules adopts highly efficient conversion technology and strict over-current and over-voltage protection, which effectively prevents module damage caused by power supply problems.

At the same time, our LED modules are also characterized by low energy consumption and high efficiency, reducing overall operating costs.

P2 LED module -power
P2 LED module receiving card

Receiving Card of P2 LED module

There are many brands of receiver card, but LEGIDATECH only cooperates with famous brand novastar and use novastar MRV412 uniformly. One receiver card can take 12 modules, 2 wide and 6 high. This ensures a clear and smooth picture while saving cost and guaranteeing quality for customers.

The receiver card of P2 LED module is mainly used to receive and analyze the video signal to ensure the picture can be accurately and smoothly presented on the display.

The receiver card also has the function of adjusting parameters such as brightness, contrast and color to meet the needs of different application scenarios.

SMD COB HOB of P2.5 LED module

P2 LED display module is a smaller pitch indoor LED display module, the most common types are HOB COB and SMD. SMD (Surface Mount Device) LED module adopts more advanced technology.

SMD LED modules utilize more advanced technology. the LED beads are mounted on a printed circuit board (PCB), allowing for higher pixel density and clearer picture performance.

COB and HOB are chips placed on the PCB board. COB is a condensation technology that allows the LED dots to emit light uniformly, enhancing the display effect; HOB is a thermal condensation technology that makes the LED light source more concentrated, improving brightness and clarity;

P2.5 and the following small pitch support COB HOB technology. Better protection and realistic effect.

SMD.COB,HOB
P2 led screen structure

E Structure of P2 LED Screen

In addition to P2 LED modules, LEGIDATECH can also be equipped with specialized E-structures. Whether it is an indoor control room or a wall fixed mounting structure, it can be exclusively customized.

E-structure makes the splicing between modules more tightly, effectively reduces the seams, and improves the coherence and aesthetics of the overall picture.

From modules, fittings and wires, mounting structure to transportation, customers can purchase everything they need for project installation in one stop. It greatly saves customers’ purchasing time and cost.

P2 LED Module Used in Shopping Mall

With high-definition pixels, bright colors and high contrast, P2 LED modules can bring new advertising displays for businesses.

No matter it is P2 soft module, P2 transparent screen or other creative LED screen, it can bring visual enjoyment to the audience with high-definition picture.

At the same time, its energy-saving and environmentally friendly characteristics are also in line with the concept of green development of shopping centers.

It creates a comfortable and energy-saving shopping environment for both merchants and consumers.

P2 LED module for indoor (10)
P2 LED module for indoor (8)

P2 LED Module Used in Meeting Room

Conference rooms often need to demonstrate data or image video, and the limited size of TV sets can’t meet the large-scale conference.

P2 LED modules support seamless splicing. Its adjustable brightness and color temperature can also be adjusted according to different meeting needs, making the conference room environment more comfortable and professional.

Whether it is a PPT presentation, video conference or data analysis report, the high definition picture and smooth playback effect of P2 LED  screen module can help participants better understand and master the content of the meeting.

P2 LED Module Used in Church

In churches, P2 LED modules are usually used to display religious stories, scriptures, service times, music lyrics and other contents.

It attracts the attention of the congregation and sets the mood for the church service.

P2 LED modules can also be used for promotional activities, delivering messages, displaying educational content and other purposes.

They not only enhance the visual effect of the church, but also provide more ways of communication!

P2 LED module for indoor (9)
P2 LED MODULE-factory
Quick Quote
Update cookies preferences
Scroll to Top