- What is P5 LED display?
- What is a P5 panel?
- What is the cost of P5 outdoor LED display?
- What is the difference between P5 and P10 LED display?
- p5 outdoor LED display installation method.
1.What is P5 LED display?
The outdoor P5 outdoorLED display is a display designed for outdoor environments with high brightness, water and dust resistance, and high refresh rate. It has a pixel density of 40,000 points /㎡, a white balance brightness of 5500cd/m and a screen refresh rate of 3840Hz or 1920Hz.
The display screen is mainly used for outdoor advertising, commercial media display, video picture information play and other scenes, especially suitable for commercial square, school sports ground, outdoor building media, government and enterprise publicity screen, station, airport information broadcast control screen, commercial CBD media display, outdoor information play screen and other places to use. Its high pixel density and resolution can better display the details of the picture and improve the viewing experience.
- Large viewing Angle, the horizontal viewing Angle reaches more than 140°, the vertical viewing Angle reaches more than 130°, the all-round viewing effect is consistent.
2.The use of high-quality SMD lamp, high brightness, fully meet the outdoor brightness display standard requirements, the display is still clearly visible under the sun strong light.
3. Mask shading design is not reflective, the use of high-quality imported plastic rice production, UV resistance, long-term use does not fade, uniform ink color does not change, maintain the original contrast and consistency of the product, long-term use, the effect is always the same.
4. The module waterproof performance is good, the lamp tube waterproof performance is strong, the lamp surface adopts the glue filling process, the back plus spray three anti-paint, double waterproof protection, rain or shine efficient work.
5. Strong weather resistance can adapt to all kinds of harsh outdoor environment.
6. Wide range of application, indoor and outdoor, not only suitable for outdoor solid installation, to solve the majority of rental companies choose indoor and outdoor LED display a major problem.
7. Compared with outdoor direct-inserted full-color products, it is more lightweight and convenient for the assembly of the box, the installation of the whole screen, transportation and later maintenance, saving time and effort.
| Household appearance pasted P5 full color LED display specifications introduction | |
| Tube | SMD2727 |
| Like decimal point spacing | 5mm |
| Pixel composition | 1R1G1B |
| Dimensions (length * width * thickness) | 320 * 160 * 18.3 mm |
| Structural features | Combination of lamp drive |
| Input voltage (DC) | 4.5 5.5 V |
| Module power | ≤35W |
| Pixel density | 40000Dots/㎡ |
| Module resolution | 64*32=2048Dots |
| Weight | 0.495 kg + 0.05 kg |
| Kit materials | Polycarbonate PC stock |
| Maximum current | 9.18 A + / – 0.1 A |
| Drive mode | 1/8 Dynamic constant current drive |
| Refresh rate (HZ) | P 960 |
| Standard conventional box frame specifications | 960mm*960mm*90mm |
| Box resolution | 192*192=36864 Dots |
| Full screen power consumption | 897W/㎡ |
| Normal no breakdown time | ≥ 10,000 hours |
| Brightness | ≥6000 cd/㎡ |
| Viewing Angle (°) | Horizontal: 140°, vertical: 130° |
| Best viewing distance | ≥5m |
| Gray Level (Bit) | 13 |
2.What is a P5 panel?
The module size of the outdoor P5 panel is 320mm*160mm and 160mm*160mm. In general, many engineers will choose 320mm*160mm. The brush heart rate of outdoor P5 module is generally 1920HZ/3840HZ, and the viewing distance is greater than 5 meters. When buying the outdoor P5 LED module, the LED lamp bead selected must be a well-known brand (nationstar), a good LED lamp bead will have a better display effect, will have a longer service life.
3.What is the cost of P5 outdoor LED display?
The cost of P5 OUTDOOR LED display is mainly determined by the price of raw materials of the manufacturer. For example, we generally recommend using Taiwan Mingwei power supply, and most people use NOVASTAR and LINSN control systems for P5 LED display. Therefore, the cost of P5 outdoor LED display only has a price range, about 600USD-800USD per square. When you buy, you also need to consider the transportation cost and installation cost. The installation cost and transportation cost are not low, and the price level of each country is different, so this price is impossible to estimate.
4.What is the difference between P5 and P10 LED display?
In the case of the same area, the resolution of P5 LED display is greater than that of P10 LED display, so the clarity of P5 LED display is higher than that of outdoor P10 LED display.
The viewing distance of P5 LED display is greater than 5 meters, but the viewing distance of P10 LED display is greater than 10 meters. This depends on the viewing distance of the project to decide which model of LED display to use.
Under the technical parameters of the same LED display, the production cost of P5 LED display is higher than that of P10 LED display.
The brightness of P10 LED display is higher than P5 LED display in most cases. If the LED display is exposed to direct sunlight, it is recommended that you purchase P10 LED display.
If the area of the LED display used in the project is very large, it is recommended to purchase P10 LED display.
5.p5 outdoor LED display installation method.
When customers buy P5 LED display, we need to design steel structure drawings according to the size of the purchased LED display. In the design of steel structure drawings, we must go to the installation site to investigate the environment, and then take a good picture of the site environment, the designer can design the specific steel structure according to the picture of the site. We also need to arrange the power cord and signal line in advance. We need to communicate with your end customers and designate the control room.
P5 LED display installation precautions
(1) Installation of lightning protection devices on display screens and buildings
The main body and shell of the display screen should be well grounded, and the grounding resistance is less than 3Ω, which can increase the leakage of current.
(2) Waterproof measures of the LED display itself
The screen body and the place where the screen body and the building are combined must be waterproof and leakproof. Because the LED display is often installed in the outdoor sun and rain, the working environment is harsh, so it needs to be strictly waterproof and moisture-proof. So as not to cause short circuit, fire, etc.
(3) Circuit chip selection
Choose an industrial-grade integrated circuit chip with a working temperature between -40 ° C and 80 ° C, and try to prevent the display from starting because the temperature is too low.
(4) Install ventilation equipment to cool down and keep the internal temperature of the screen body from being too high
Since the display itself will produce a certain amount of heat when working, if the ambient temperature is too high and the heat dissipation is poor, the integrated circuit may not work properly, or even be burned, so the axial flow fan needs to be installed behind the screen body to discharge the heat in time.
(5) Ultra-high luminosity light-emitting diodes must be selected
In order to increase the contrast, the receiver width, to prevent excessive changes in the ambient light, so it is necessary to choose ultra-high brightness LED, to ensure that in the case of strong ambient light can be seen at a distance.
The steel structure on the back of the screen body is shown below
The frame part is as follows
Frame side, no wrapped edge
Install the box as shown below
LED display front
