Outdoor LED Display Price 2026: Cost per m² by Pitch

Ан наружный светодиодный дисплей usually costs US$280–950 per square meter for the panel alone in 2026, before control, steel, installation, shipping and spare parts. The exact number depends on pixel pitch, brightness, IP rating, cabinet material, screen size and where the screen is installed. This guide breaks the price down by pitch, area and region, shows what a complete project costs, and explains why two quotes for the “same” screen can differ by 40%. For the full indoor/outdoor comparison, see our Руководство по ценам на светодиодные экраны.

Outdoor LED display price at a glance: panel hardware typically runs US$280–950/m² in 2026 — P10 around US$280–420, P8 US$350–520, P6 US$420–680, P5 US$550–850 and P4 US$750–950. A complete installed project usually adds 35–60% on top of the panel for control, structure, installation and freight.

Get a 2026 Outdoor LED Price Quote

Outdoor LED Display Price Range in 2026

The outdoor market has a wide price band because “outdoor LED display” covers everything from a P10 highway billboard to a high-brightness P4 landmark facade. The panel price is driven mainly by pixel pitch: smaller pitch means more LEDs and driver ICs per square meter, so the cost rises. Brightness, IP rating and cabinet material then move the number within each pitch band.

For a quick budget, use the panel range and add the project costs. A 30 m² P6 screen, for example, is roughly US$12,600–20,400 of panel hardware; control, steel, installation and freight typically add another US$5,000–10,000 depending on the site. That is the number to compare with a turnkey quote, not the panel price alone.

Outdoor LED Display Price by Pixel Pitch

The table below is our 2026 factory-direct panel range. It excludes control, structure, installation, shipping and taxes; those are covered in the project-cost section below.

Шаг пикселяPrice range (USD/m²)Recommended viewing distanceTypical use
P10 outdoor$280–42020–30 мHighway billboards, long-distance advertising
P8 outdoor$350–52015–25 мCity billboards, building facades, roadside screens
P6 outdoor$420–68010–18 мPlazas, scenic spots, government projects, stadium perimeter
P5 outdoor$550–8508–12 мMall facades, premium outdoor ads, hotel exteriors
P4 outdoor$750–9506–10 мLandmark facades, luxury retail, close-view media walls

For a deeper specification on the most common outdoor pitch, see our P6 outdoor LED display guide.

Three options move the price outside the standard band:

  • High-brightness 7,000–10,000 nits: +10–25%, because the LEDs, driver ICs and heat management are upgraded.
  • Energy-saving / common-cathode design: +5–15% on hardware, but 20–30% lower power consumption over the project life.
  • Front-service or custom cabinet: +10–20%, because the cabinet and module access change.

Outdoor LED Display Price by Screen Area

Area changes the total budget, and it also changes the price per square meter: larger orders spread tooling, setup and freight across more panels, so the unit price usually improves. The examples below use the P6 range and a mid-size outdoor project; use them as a planning grid, not a quotation.

Область экранаExample sizePanel cost at P6 ($420–680/m²)Typical installed budget*
10 m²4 × 2.5 m$4,200–6,800$6,000–10,000
20 m²5 × 4 m$8,400–13,600$12,000–20,000
30 m²6 × 5 m$12,600–20,400$18,000–30,000
50 m²8 × 6.25 m$21,000–34,000$30,000–50,000
100 m²10 × 10 m$42,000–68,000$60,000–100,000

*Installed budget is an indicative range including control, steel structure, installation and freight; it excludes permits, power upgrades and taxes. Site conditions can move it significantly.

For larger screens, the panel share of the budget falls and the structure/installation share rises. A 100 m² roof-mounted billboard may spend more on steel and access than a 100 m² ground-level wall, even though the panel price is the same. If you are still fixing the wall dimensions, use our LED screen size guide и resolution calculator before comparing quotes.

Outdoor LED Display Price by Region

The factory price is only one part of the landed cost. Freight, insurance, port handling, import duties and local installation change the number by region. The table below shows typical uplifts over the factory panel price; confirm the exact figure with your freight forwarder and customs broker.

DestinationTypical landed-cost upliftWhat drives it
China domestic / factory pickupBase priceNo international freight or duty
Southeast Asia+5–10%Short sea freight, low duty in many markets
Middle East+8–15%Sea/air freight, port handling, project-site delivery
Africa+10–20%Freight, clearing, inland transport, currency and duty variation
Европа+12–22%Freight, VAT/duty, compliance documentation, local installation
Северная Америка+12–25%Freight, duty, customs, local electrical and structural requirements
Remote / island sites+20–35%Multiple freight legs, small-volume shipping, limited local labour

These uplifts are typical ranges, not fixed percentages. A project in Nigeria or Kenya may sit at the higher end because of clearing and inland transport; a project in Singapore may sit at the lower end. Always compare quotes on the same Incoterm — FOB, CIF or DDP — before deciding which is cheaper. For a country-level landed-cost example, see our LED screen price in Nigeria гид.

Outdoor LED display cabinets crated for export shipping

Outdoor LED cabinets crated for export — freight and clearing are part of the landed cost

Из чего складывается реальная стоимость проекта

A turnkey outdoor LED project has six cost lines. The percentages below are typical for a mid-size fixed installation; the split changes with screen size, structure height and site access.

Cost lineShare of project budgetWhat it includes
LED panels and cabinets55–65%Modules, cabinets, power supplies, receiving cards
Control system and processor5–10%Sending card, processor, software, playback device
Steel structure and installation15–25%Frame, foundation, access equipment, labour
Shipping, insurance and clearing5–10%Freight, wooden cases, insurance, port charges
Запчасти3–5%Spare modules, power supplies, receiving cards
Contingency3–5%Site changes, permits, currency movement

The panel share is highest on a simple wall-mounted screen and lowest on a tall structure with difficult access. If a quote is much cheaper than the others, check which of these lines it leaves out — especially steel, installation, commissioning and spares.

Примеры цен для различных вариантов наружного применения

Different applications sit at different points in the price band because the viewing distance, brightness and structure change together.

ПриложениеCommon pitchTypical panel rangeWhy
Highway billboardP8–P10$280–520/m²Long viewing distance; high brightness; large area
Shopping mall facadeП5–П6$420–850/m²Closer audience; higher contrast; 24/7 operation
Building facade media wallP4–P6$420–950/m²Landmark quality; high brightness; aluminum cabinet
Convention center / plazaП5–П6$420–850/m²Video content; 3,840 Hz refresh; balanced brightness
Stadium perimeterP6–P10$280–680/m²Long viewing distance; impact-resistant cabinet; high refresh

Outdoor LED display at a convention center or cultural square

Convention center and public square installations — P5–P6 with 3,840 Hz refresh

Large outdoor LED billboard project

Large outdoor billboard — panel cost is only part of the project budget

Outdoor LED billboard above a commercial street in Lagos

Outdoor LED advertising in Lagos — landed cost includes freight, clearing and installation

Ключевые факторы, влияющие на цену

Шаг пикселя is the largest single driver. P10 uses 10,000 pixels/m²; P4 uses 62,500 — more than six times the LEDs and driver ICs for the same area. That is why P4 costs roughly 2–3 times P10 per square meter. For the pitch-to-distance relationship, see our pixel pitch and viewing distance guide.

Яркость matters next. A standard 5,000–6,500 nit outdoor panel is enough for most facades; 7,000–10,000 nits for direct sun and airports adds 10–25% because the LEDs, ICs and cooling are upgraded.

Рейтинг IP changes the cabinet cost. IP65 is the outdoor baseline; IP66 adds stronger sealing for coastal and heavy-rain sites. The difference is usually 5–10% on the cabinet, not the whole project.

Cabinet material is a trade-off: steel is cheaper but heavy and prone to corrosion if the coating is damaged; die-cast aluminum costs more but is lighter, flatter and better for large seamless walls.

Iron outdoor LED cabinet for billboard installation

Steel outdoor LED cabinet — lower cost, heavier, needs corrosion protection

Control system and refresh rate add cost at the top end. A basic asynchronous system is enough for a billboard playlist; a 3,840–7,680 Hz synchronous system with a video processor is needed for live events, broadcast and camera-heavy sites.

Size and custom work change the unit price. Large orders get better pricing; curved, corner and custom-shaped cabinets add tooling and structure cost.

Why Outdoor Screens Carry a Higher Price Than Indoor

Outdoor screens cost more for four reasons: brightness, weatherproofing, cooling and structure. An indoor panel can run at 500–1,200 nits; an outdoor panel needs 5,000–10,000 nits to compete with sunlight, which means stronger LEDs and driver ICs. The cabinet must be sealed against rain and dust, with UV-stable masks and corrosion-resistant hardware. Heat is harder to manage when the sun hits a dark screen, so fans, vents and thermal design add cost. And the structure has to carry wind load, not just the screen weight.

Full-Color vs Single-Color/Dual-Color Outdoor Screens

Single-color screens are the cheapest: one LED color, simple text and symbols, usually for small signs. Dual-color adds a second color for simple graphics. Full-color RGB is the standard for video and advertising, and it costs the most because it uses three LED chips per pixel, a more complex driver IC and a full control system. For any screen that will show video or brand content, full-color is the only practical choice.

Single-color outdoor LED display for simple text signage

Single-color outdoor LED display — lowest hardware cost, limited content

How to Compare Outdoor LED Quotes

Two quotes for a “30 m² P6 outdoor screen” can differ by 40% without either supplier lying. Compare these eight lines before you decide:

#ПроверятьWhy it matters
1True pixel pitch and module resolutionP6.0 vs P6.67 changes the pixel count and price
2Brightness at the actual site6,000 vs 8,000 nits changes LEDs, power and cost
3IP rating front and rearIP65 front with IP43 rear is not the same as IP66
4Cabinet material and weightSteel vs aluminum changes structure and installation cost
5Control system and processor“NovaStar system” is not a model or a specification
6Steel, installation and commissioningThe cheapest quote often excludes these
7Freight, insurance and IncotermFOB vs CIF vs DDP changes the landed cost
8Spare parts and warrantyA 3–5% spare kit protects the screen after handover

Compare Your Outdoor LED Quotes

Часто задаваемые вопросы

Сколько стоит уличный светодиодный экран за квадратный метр?

In 2026, outdoor LED panels typically cost US$280–950/m² depending on pitch: P10 about $280–420, P8 $350–520, P6 $420–680, P5 $550–850 and P4 $750–950. Control, steel, installation and freight are extra.

Why does P4 cost so much more than P10?

P4 has 62,500 pixels/m² versus 10,000 for P10 — more than six times the LEDs and driver ICs for the same area. The finer pitch also needs tighter cabinet tolerances and a stronger control system, so the panel cost is roughly 2–3 times higher.

How much does a 30 m² outdoor LED screen cost?

A 30 m² P6 panel is roughly US$12,600–20,400 at the 2026 range. A complete installed project is typically US$18,000–30,000 including control, steel, installation and freight, depending on the site.

Do outdoor LED screens always need 7,000 nits?

No. 5,000–6,500 nits is enough for most shaded facades and city screens. Use 7,000–10,000 nits for direct sun, west-facing walls, airports and highway sites; the higher brightness adds 10–25% to the panel cost.

Why do quotes for the same screen differ so much?

They often include different scopes: one quote may exclude steel, installation, commissioning, spares or freight; another may use a lower-brightness LED bin, a thinner cabinet or a cheaper control card. Compare the eight lines in the checklist above, not just the total.

How much does installation add to an outdoor LED project?

Steel structure and installation typically add 15–25% of the project budget. A simple wall mount is at the low end; a tall roadside structure with foundation, access equipment and permits is at the high end.

Is a cheaper P8 screen better than P6 for a billboard?

If the nearest viewer is 15 m or more, P8 can deliver the same perceived clarity for less money. If the audience gets within 8–10 m, P6 is visibly cleaner. Choose by the closest important viewer, not the average distance.

How long does an outdoor LED screen last?

A well-built outdoor panel is rated for about 100,000 hours to 50% brightness — roughly 11 years at 24/7 or 22 years at 12 hours a day. Real-world life depends on brightness settings, heat, power quality and maintenance.

Conclusion: Compare the Project, Not the Panel Price

The panel price is the easy number to quote and the easiest number to mislead with. A real outdoor LED budget includes brightness, IP rating, cabinet, control, steel, installation, freight and spares. Use the pitch and area tables to set a realistic range, then compare quotes line by line.

If you send us the screen size, the viewing distance, the site photos and the destination country, we will return a panel price, a landed-cost estimate and a project budget with the main cost lines separated.

Request an Outdoor LED Project Budget

LEGIDATECH — это производитель светодиодных экранов supplying outdoor LED billboards, rental LED walls and indoor LED video walls from our Shenzhen factory.


Связанный:

LED Screen Price Guide 2026

Indoor LED Screen Price Guide

Стоимость аренды светодиодного экрана

LED Screen Price in Nigeria

P6 Outdoor LED Display Ultimate Guide

Прокрутить вверх