What is P10 LED display?
The P10 LED display is a modular electronic display device with a 10mm pitch between LED lamp beads. The cabinet size is generally 960*960mm and can be seamlessly spliced. The minimum viewing distance is 10 meters and it is widely used in various outdoor advertising scenarios.
With the development of outdoor and indoor advertising industries, more and more customers have higher and higher requirements for energy saving and brightness of outdoor advertising P10 LED display screens.
At the same time, with the continuous breakthrough of new technologies of LED display screens, energy-saving technology has been fully innovated in outdoor LED display screens without reducing brightness.
Therefore, new outdoor advertising LED display screens are constantly being developed. For example, the energy-saving outdoor P10 LED screen.
Today LEGIDATECH will give a comprehensive introduction to the P10 LED display screen.
P10 LED Display Specifications
LED: SMD3535 or DIP 346 Point center distance: 10 mm Pixel density: 10000 dots/㎡
سطوع : 5500 cd/㎡-10000cd/㎡ Refresh rate :3840HZ Protection level: IP65
Judging from the above technical parameters of the LED screen P10, since the waterproof level and brightness of the P10 outdoor advertising display fully meet the outdoor environment use, the P10 outdoor can still be used stably even in heavy rain and direct sunlight.
Although the pixel pitch of the P10 LED screen is large, it can also be used in indoor scenes, such as the subtitle LED display in an indoor conference hall or an indoor bar.
Such scenes do not require high resolution for the LED screen and only need to play animation materials.
LED screen P10 are classified according to production process:
With the continuous development of LED display production technology, p10 can be divided into DIP P10 LED display and SMD P10 LED board.
The disadvantage of the DIP p10 LED board is: since the red chip, green chip and blue chip need to be packaged independently, the weight of the LED display is greatly increased.
Moreover, the gold wire packaging used by p10 DIP greatly increases production costs.
Advantages of DIP LED display:
The brightness of DIP p10 can reach 10000cd/㎡. With such dry brightness, the service life of the outdoor advertising LED display will not be reduced.
Advantages of SMD p10 LED display:
Since the red, green and blue chips are encapsulated in one LED lamp bead, the weight of the LED display is greatly reduced, which saves customers transportation costs and later steel structure construction costs.
At the same time, it also reduces production links, which also reduces production costs.
Maintenance method of p10 LED module:
There are two types: rear maintenance p10 LED display and front maintenance p10 LED display.
rear maintenance P10 LED screen so that when repairing the P10 module, the maintenance staff needs to remove the screws fixing the LED module from the back of the LED display screen body.
front maintenance P10 LED display is performed when replacing the P10 LED module.
Maintenance personnel can use maintenance tools to replace the damaged p10 LED module from the front of the LED display.
-
The advantage is that the production cost is reduced.
The disadvantage is that a large installation space is required during the post-production of the steel structure, and a maintenance channel needs to be made to facilitate the maintenance staff to remove the P10 LED module.
-
Disadvantages of P10 front maintenance: High production cost
Advantages of P10 front maintenance: Simpler and more convenient maintenance. Supports wall installation, no need to reserve maintenance channel, saving installation cost
P10 rear maintenance LED Display-B pro
The 960mm×960mm or 1280mm×960mm iron cabinet is the most classic LED display cabinet in the LED display market.
The advantage is that the production cost is low, and p10 LED displays of different sizes can be customized according to customer needs.
And the disadvantage is that the p10 LED billboard made of iron cabinet is relatively heavy.
Outdoor led screen-B series
2> The P10 LED display screen is made of magnesium aluminum alloy in three sizes: 1280 mm × 960 mm, 960 mm × 960 mm, and 960 mm.
The advantage is that the raw materials are relatively light, and the box is equipped with quick splicing locks, so the P10 display is light in weight, and the installation speed is faster and more convenient.
The disadvantage is that the size cannot be customized, and the production cost is more expensive than the iron cabinet.
Outdoor LED Panel billboard-OK series
3> 960mm×960mm front maintenance LED cabinet made of profile cabinet.
Advantage is that this p10 LED billboard is lighter.
Disadvantage is that the box size is only 960mm×960mm or 1000mm×1000mm.
The size of this LED display cabinet does not support the customization of LED display cabinets of multiple sizes.
Power supply for P10 LED Panel
Power input: 110V-240V
P10 LED display Power output: 5V60 A
Power supply: 300W
For conventional non-energy-saving p10 960×960mm LED displays, we usually install three 300W switching power supplies.
For the energy-saving p10 960×960mm LED display, we usually install two 300W power supplies.
We provide customers with high-quality power supplies of different brands, such as Shenzhen G-energy power supplies, Changzhou Chuanglian power supplies and MEAN WELL power supplies, etc.
LEGIDATECH has cooperated with many LED control system suppliers for many years and can provide customers with synchronous control systems and asynchronous control systems such as Novastar, لينسن and Colorligt.
P10 LED display connection method:
Soft-connected p10 LED display
The soft-connected P10 LED display means that the signal interface of the P10 LED module and the signal interface of the system receiving card are connected through a 16p signal cable.
The advantage is that the manufacturing cost is low, and customers can buy a universal one at any time during maintenance. Replace the cable.
And the disadvantage is that the signal may be subject to electromagnetic interference, or the signal may be unstable.
Hard-connected p10 LED display
The hard-wired p10 LED display means that the signal interface of the p10 module and the signal interface of the system receiving card are connected through a specially designed PCB integrated circuit board.
And it provides power drive to the p10 LED module through the PCB integrated circuit board.
The disadvantage of the hard-wired p10 LED display is the high manufacturing cost, but the advantage is stable signal transmission and strong signal anti-interference ability.
P10 LED Modules
P10 LED module size:
Rear maintenance LED module
320 mm×160 mm/320 mm×320 mm/480 mm×320 mm/500 mm×250 mm
LEDs: 3535/2727 nationstar
SMD P10 LED module size:
480mm×320mm
Front maintenance
P10 DIP LED module sizes:
160 mm × 160 mm, 320 mm × 160 mm, 320 mm × 320 mm
LEDS: DIP 346
IC: MBI5124
Rear maintenance
The installation methods of the P10 outdoor LED screen include wall installation, column installation, ground installation, etc. You can choose the appropriate installation method according to specific needs.
P10 outdoor LED screens usually adopt asynchronous control or synchronous control and have the characteristics of remote control, wireless transmission, and strong interactivity.
The service life of an LED screen P10 is usually around 5-10 years, depending on screen quality, environmental conditions, frequency of use, and other factors.
P10 outdoor LED screen is suitable for outdoor places such as squares, commercial streets, stadiums, stations, billboards, etc. for displaying advertising, information release, festival celebrations, and other activities.
Related LED screen P10
P10 Outdoor LED Screen Price
P10 LED display price typically ranges from US$300 to US$500 per square meter, depending on factors such as brightness level, LED cabinet material (iron, aluminum, or die-cast), and waterproofing rating.
With a 10 mm pixel pitch, the P10 LED display is ideal for viewing distances of 10-20 meters, making it ideal for billboards, roadside displays, and building facades. The total project cost also includes accessories such as the control system, steel structure, and power supply, as well as transportation and installation.
For a more accurate quote, LEGIDATECH can customize the P10 LED panel based on your screen size, location, and installation method.
P10 LED Panel Packaging:
LEGIDATECH provides customers with two types of packaging: one is wooden box packaging, and the other is flight case packaging.
If the customer installs the P10 LED Panel in a fixed place for a long time, we recommend that the customer choose wooden box packaging.
And if the customer is renting it, such as customizing a P10 stadium LED display, we recommend that the customer choose flight case packaging.
LED Display P10 Wooden packing
flight case packaging
Why choose the P10 LED screen produced by LEGIDATECH?
Because the LEGIDATECH LED display factory has developed LED displays with different characteristics for different P10 LED panel application scenarios.
ليجيداتيك has p10 LED displays that can produce naked-eye 3D, transparent P10 LED displays, floor tile p10 LED displays, stadium p10 LED displays, outdoor curved p10 LED displays, sphere p10 LED displays، إلخ.
It has the most complete P10 LED panel production system.
Arabic 
English 
Spanish 
German 
French 
Russian 
Italian 
Japanese 
Vietnamese